def set_motor_speeds(self, base_speed, turn_speed): """ Calculate and set left/right motor speeds based on base speed and turn """ # Differential steering left_speed = base_speed + turn_speed right_speed = base_speed - turn_speed # Apply speed limits left_speed = max(-self.MAX_SPEED, min(self.MAX_SPEED, left_speed)) right_speed = max(-self.MAX_SPEED, min(self.MAX_SPEED, right_speed)) # Set motor speeds self.bot.set_left_motor_speed(left_speed) self.bot.set_right_motor_speed(right_speed)
def follow_line(self, duration=None): """ Main line following loop Args: duration: Time to follow line in seconds (None = run until stopped) """ print("Starting line follower...") print("Press Ctrl+C to stop") try: running = True start_time = time.time() while running: # Check duration if duration and (time.time() - start_time) >= duration: print(f"Completed duration seconds of line following") break # Read sensors sensors = self.read_line_sensors() position = self.calculate_line_position(sensors) # Calculate time delta for PID current_time = time.time() dt = current_time - self.last_time self.last_time = current_time if position is not None: # Line detected - follow it self.line_lost_timer = 0 # Calculate error (0 = center) error = position # Get PID output turn_speed = self.pid_control(error, dt) # Dynamic speed adjustment based on how centered we are # Slower on turns, faster on straight lines speed_factor = 1.0 - (abs(error) * 0.2) current_base_speed = max(self.MIN_SPEED, self.BASE_SPEED * speed_factor) # Set motor speeds self.set_motor_speeds(current_base_speed, turn_speed) # Debug output print(f"Pos: position:+.2f | Turn: turn_speed:+5.1f | " f"Speed: current_base_speed:5.1f | Sensors: sensors") else: # No line detected - handle line loss self.line_lost_timer += dt if self.line_lost_timer > self.EMERGENCY_STOP_TIME: print("Line lost for too long!") self.stop() if self.search_for_line(): # Reset PID state after finding line self.reset_pid() continue else: print("Cannot find line. Stopping.") break else: # Short line loss - just stop and wait self.stop() print("Waiting for line...") # Small delay to prevent overwhelming the system time.sleep(0.02) except KeyboardInterrupt: print("\nStopped by user") finally: self.stop() mbot2 line follower code
class MBot2LineFollower: """Complete line follower implementation for MBot2 robot""" left_speed)) right_speed = max(-self.MAX_SPEED